Two credible reports put the Saudi Arabia industrial valves market at $725.0 million and about $990 million for 2025. They list the same valve types and end uses, so the 37% gap is a genuine disagreement. Customs data sit more easily with the higher figure: for 2026, carry about $1 billion growing near 6% a year.
What do the two reports say?
$725.0 million against about $990 million. Those are the 2025 values of the Saudi Arabia industrial valves market in two reports published within weeks of each other: IMARC Group’s on November 25, 2025, and MarkNtel Advisors’ in December 2025. MarkNtel’s figure is 36.6% higher, 37% rounded. Both pages carried these numbers when read on October 17, 2026.
The forecasts pull further apart. IMARC projects $1,120.8 million by 2034, growth of 4.96% a year from 2026. MarkNtel projects $1.73 billion by 2032, about 8.15% a year over 2026 to 2032. MarkNtel’s 2032 figure is 54% above IMARC’s 2034 figure, and it arrives two years sooner.
| IMARC Group | MarkNtel Advisors | |
|---|---|---|
| Published | November 25, 2025 | December 2025 |
| 2025 market | $725.0 million | About $0.99 billion |
| Forecast | $1,120.8 million in 2034 | $1.73 billion in 2032 |
| Growth rate | 4.96% a year, 2026–2034 | About 8.15% a year, 2026–2032 |
| Valve types named | Gate, globe, butterfly, ball, check, plug, other | Globe, ball, check, butterfly, gate, other |
| End uses named | Oil and gas, power, pharmaceutical, water and wastewater, chemical, food and beverage, other | Oil and gas, energy and power, pharmaceutical and healthcare, water and wastewater, chemicals, food and beverages, other |
| Value basis stated | None on the page | Revenue in US dollars; no valuation point |
Read as a pair, the reports differ on the size of the market and, more expensively, on its speed. An investor who quotes one without the other has picked a side in a disagreement without knowing it exists.
Is the 37% gap definitional or genuine?
Genuine. A definitional gap needs a difference in what is counted, and the two pages show none. Both measure 2025, both in US dollars, and both name the same five valve types and the same six end uses; IMARC also names plug valves, which MarkNtel does not list separately. Neither states where in the value chain a valve is priced, at the factory gate or at the end user, so the one basis that could explain the gap is published by neither.
That changes the work. The usual way to reconcile two market size estimates is to find the definition that separates them and restate one figure on the other’s basis. Here there is nothing to restate. Two firms counted the same market and reached different answers, so the difference sits in method: the installed base each assumed, the price per valve, the share of project volume each captured. Neither page publishes those inputs.
Ken Research shows what a definitional gap looks like. Its page, dated May 2026, puts the market at $1,980 million in 2024 and $2,094 million in 2025, and says the figure reflects “industry revenue at point of sale to end users, combining manufacturer and distributor revenue,” excluding separately billed repair labor. That is a stated basis, and it sits above a factory-gate measure by the distribution margin.
The basis explains only part of it. Ken Research lists four valve types as segments (ball, gate, globe and butterfly) and four end uses, fewer than IMARC or MarkNtel, yet its 2025 figure is 2.1 times MarkNtel’s and 2.9 times IMARC’s. Its oil and gas segment alone, $792 million in 2024, exceeds IMARC’s whole 2025 market. For the valuation point alone to close a 2.1-times gap, the channel would have to more than double the price of every valve between factory and end user.
Caspr’s Market Research Study, completed in August 2026, read the three figures as narrow, mid and broad lenses on one market. Today’s pages sharpen that: between IMARC and MarkNtel no perimeter difference is published, and the 37% is a disagreement between two counts of the same thing.
Why does the growth gap matter more than the 37%?
70%
On IMARC’s 4.96% a year, its $725.0 million reaches about $1.02 billion in 2032. MarkNtel publishes $1.73 billion for the same year. A 37% gap in the base year becomes 70% seven years later.
The increment is the number a growth thesis lives on. Between 2025 and 2032, IMARC’s path adds about $0.29 billion of annual market revenue; MarkNtel’s adds $0.74 billion, 2.5 times as much. A buy-and-build plan written as a share of market growth underwrites a different opportunity depending on which report sits in the memo. This means the growth rate, not the base, is the assumption to test first.
Caspr’s Study took its own view of the rate, tied to named projects: Aramco’s Jafurah gas field, producing since 2025, and urban water demand projected to rise from 15.47 million to 17.08 million cubic meters a day between 2024 and 2030. Its base case is 5.8% to 6.2% a year for 2026 to 2032, with a bear case of 4.8% to 5.3% and a bull case of 6.8% to 7.6%. It judged a rate above 8% “aggressive for a strict industrial-valves-only forecast” without strong pricing and a sharp rise in digitally enabled service revenue.
Against that range, MarkNtel’s 8.15% sits above the bull case and IMARC’s 4.96% inside the bear case. The disagreement on growth is wider than the one on size, and it compounds every year the asset is held.
What do Saudi import statistics say about the size?
Customs data cannot name the right figure, but they can test each one. In 2024 Saudi Arabia imported $142.8 million of check valves, $239.6 million of safety and relief valves and $1,865.6 million under the heading for other taps, cocks and valves, according to World Bank trade data. That is $2,248.1 million at customs value, in the year before the reports’ base year.
| HS code | What it covers | Import value |
|---|---|---|
| 848130 | Check valves | $142.8 million |
| 848140 | Safety or relief valves | $239.6 million |
| 848180 | Other taps, cocks and valves: industrial gate, globe, ball and butterfly valves, with building taps and mixers | $1,865.6 million |
| Total | Three headings | $2,248.1 million |
The first two lines are mostly industrial equipment, and together they come to $382.5 million: 53% of IMARC’s whole 2025 market before a single gate, ball or butterfly valve is counted. Those sit in the third line, alongside building fittings, and the six-digit code does not separate them.
So the useful question is how much of the third line each figure leaves room for. Assume Saudi factories make nothing, which favors the lower figures, and count every imported check and relief valve as industrial. IMARC’s $725.0 million then allows at most 18% of the main heading to be industrial valves. MarkNtel’s $990 million allows 33%. Ken Research’s $2,094 million, measured at end-user prices, allows 92%. Saudi factories do make valves, among them AVK Saudi’s plant in Jeddah and SLB’s valve facility, so the true room is smaller still.
This means the lower report holds only if more than four-fifths of what Saudi Arabia imports under its main valve heading is plumbing and building hardware, in a year the Study describes as one of strengthening gas and water project demand.
The test has limits in both directions. Customs value is struck at the border, before any distributor margin, and setting 2024 imports against 2025 market values flatters the reports; re-exports, and any check or relief valves bought for buildings, cut the other way. What would settle the level is how the main heading splits between industrial and building valves, which sits in the national tariff lines below the six-digit code. Setting a published size against one hard trade number is a fast way to tell whether a market size number is credible, and here it argues against the floor.
Which figure belongs in an investment memo?
Carry about $1 billion for 2026, growing near 6% a year, and show both reports beside it. That is the Caspr Study’s central range of $0.95 billion to $1.10 billion and its base case of 5.8% to 6.2%. The level sits with MarkNtel’s count, which the import data favor; the rate rests on project anchors rather than on either report’s forecast. Nothing in it splits the difference between the two.
Three conditions travel with that number. It holds if no more than about a third of the main import heading is industrial valves; above that, the market is larger than either report says, and Ken Research’s end-user figure becomes the reference. The basis must match the target’s revenue line: a manufacturer selling through distributors books sell-in value, so its share belongs against a factory-gate market. And growth runs at three rates, so the committee sees what MarkNtel’s 8.15% would add and what IMARC’s 4.96% would take away.
In the market section of an investment memo, that becomes one table and one sentence: both reports with publisher, date and what each counts, then the line that they agree on scope and disagree on count. If the committee asks why the memo does not use the lower figure, the reply is the import arithmetic. To defend a market size estimate against a lower published one, show what the lower one would need to be true.
The level is not where the return is made. The Study expects profit pools in control valves, actuators, diagnostics and certified service to outgrow a topline in the mid single digits, and Aramco’s iktva program reached 70% local content in February 2026, with a new target of 75% by 2030. For a fund underwriting EBITDA, a supplier’s manufacturing and service footprint inside the Kingdom moves the return more than the choice between $725 million and $990 million.
Worked example
How Caspr’s Study reconciled $725.0 million, $0.99 billion and $2.09 billion
Caspr’s Market Research Study of Saudi industrial valves, completed in August 2026, met three published 2025 figures: $725.0 million from IMARC Group, about $0.99 billion from MarkNtel Advisors and about $2.09 billion from Ken Research. It set aside a fourth, Euromonitor’s $6.9 billion, because that figure covers pumps, compressors, taps and valves together. It did not pick a winner. It read the three as narrow, mid and broad perimeters, called the published growth rates of 4.96%, 5.8%, 6.3% (6Wresearch) and 8.15% “a scope-adjusted spectrum rather than a direct disagreement about direction,” and carried a central range of $0.95 billion to $1.10 billion for 2026. Growth came from project anchors rather than from the reports, for a base case of 5.8% to 6.2% a year to 2032; from a base near $1.0 billion, 6.0% gives about $1.42 billion in 2032, which the Study labels as its own calculation, not a published figure. Re-read in October 2026, the pages carry the same IMARC and MarkNtel figures with matching scope, and show Ken Research now using 2024 as its base year, at $1,980 million. That makes the 37% a genuine disagreement, which the Study’s central range resolves toward the higher count.
The published figures
| Publisher | Figure | Period | What it counts | Published | Last verified |
|---|---|---|---|---|---|
| IMARC Group | 725.0 (USD million) | 2025 | Saudi industrial valves: gate, globe, butterfly, ball, check, plug and other valves; oil and gas, power, pharmaceutical, water and wastewater, chemical, food and beverage and other end uses; value basis not stated | November 25, 2025 | October 17, 2026 |
| MarkNtel Advisors | 0.99 (USD billion (about)) | 2025 (base year) | Saudi industrial valves: globe, ball, check, butterfly, gate and other valves; oil and gas, energy and power, pharmaceutical and healthcare, water and wastewater, chemicals, food and beverages and other end users; revenue | 2025-12 | October 17, 2026 |
| Ken Research | 2,094 (USD million) | 2025 (2024 base year: $1,980 million) | Industry revenue at point of sale to end users, manufacturer and distributor revenue combined, excluding separately billed repair labor; ball, gate, globe and butterfly valves listed as segments | 2026-05 | October 17, 2026 |
| IMARC Group | 1,120.8 (USD million) | 2034 forecast (4.96% a year, 2026–2034) | Same scope as IMARC Group's 2025 figure | November 25, 2025 | October 17, 2026 |
| MarkNtel Advisors | 1.73 (USD billion) | 2032 forecast (about 8.15% a year, 2026–2032) | Same scope as MarkNtel Advisors' 2025 figure | 2025-12 | October 17, 2026 |
| World Bank WITS (UN Comtrade data) | 1,865.6 (USD million) | 2024 | Imports at customs value, HS 848180: taps, cocks, valves and similar appliances not elsewhere specified, industrial and building valves together | 2024 calendar-year data | October 17, 2026 |
| World Bank WITS (UN Comtrade data) | 239.6 (USD million) | 2024 | Imports at customs value, HS 848140: safety or relief valves | 2024 calendar-year data | October 17, 2026 |
| World Bank WITS (UN Comtrade data) | 142.8 (USD million) | 2024 | Imports at customs value, HS 848130: check valves | 2024 calendar-year data | October 17, 2026 |
Why the figures differ
- genuine IMARC Group $725.0 million and MarkNtel Advisors about $0.99 billion, Saudi industrial valves, 2025 Same year, same currency, the same five named valve types and six named end uses. Neither page states a valuation point, so nothing either publishes explains the 37%: two counts of the same market.
- definitional MarkNtel Advisors about $0.99 billion and Ken Research $2,094 million, 2025 Ken Research values valves at the point of sale to end users, distributor revenue included; MarkNtel states revenue with no valuation point. The basis explains part of a 2.1-times gap; Ken's shorter list of valve types points away from scope as the rest.
- genuine IMARC Group 4.96% a year (2026–2034) and MarkNtel Advisors about 8.15% a year (2026–2032), growth Same base year, same scope, overlapping periods. The two disagree on the outlook itself, and compounding turns 37% apart in 2025 into 70% apart by 2032.
- definitional World Bank WITS imports under HS 848180, $1,865.6 million (2024), and the industrial valves market estimates The customs heading also holds taps and mixers for buildings and is valued at the border, before any margin. It bounds the market estimates; it does not measure the same thing.
Frequently asked
What is the size of the Saudi Arabia industrial valves market?
The Saudi Arabia industrial valves market is $0.95 billion to $1.10 billion for 2026, the central range in Caspr’s Study. Published 2025 estimates run from $725.0 million (IMARC Group) through about $990 million (MarkNtel Advisors) to $2,094 million (Ken Research, at end-user prices). Saudi import data fit figures near or above $1 billion better than the lowest.
How fast is the Saudi industrial valves market growing?
The Saudi industrial valves market should grow 5.8% to 6.2% a year from 2026 to 2032, the base case in Caspr’s Study, anchored to Aramco’s gas expansion and Saudi water demand. Published forecasts run from 4.96% (IMARC Group, 2026 to 2034) and 5.8% (Ken Research, 2025 to 2030) to about 8.15% (MarkNtel Advisors, 2026 to 2032).
Why do IMARC and MarkNtel disagree on the Saudi valves market?
IMARC and MarkNtel’s 37% gap on the Saudi valves market comes from method, not scope. Both name the same valve types and end uses for 2025, in US dollars; neither page publishes its valuation point, installed-base count or price per valve. Saudi import data suggest the lower figure is harder to square with what the Kingdom buys.
Why is the Ken Research figure twice as high?
The Ken Research figure is so high partly because it values the Saudi valves market at the point of sale to end users. That combines manufacturer and distributor revenue, so the figure includes the distribution margin. Wider product scope isn’t the reason: its page lists fewer valve types than IMARC or MarkNtel. Method explains the rest.
Does Saudi Arabia import most of its industrial valves?
Yes, Saudi Arabia imports most of its high-specification valves. Invest Saudi figures, cited in Caspr’s Study, show 2024 imports of $142.8 million in check valves and $239.6 million in safety and relief valves, with local assemblers serving only 23% to 25% of control valve actuator demand. Local production is gaining share first in gate and butterfly valves.